Oklahoma Incentives/Policies for Renewables & Efficiency |
 |
Last DSIRE Review: 03/15/2012
Program Overview:
| State: |
Oklahoma |
| Incentive Type: |
Utility Rebate Program |
| Eligible Efficiency Technologies: |
Lighting, Lighting Controls/Sensors, Chillers , Heat pumps, Central Air conditioners, Motors, Motor VFDs, Custom/Others pending approval, Led Exit Signs, Evaporative Coolers, LED Traffic Signals |
| Applicable Sectors: |
Commercial, Industrial, Nonprofit, Schools, Local Government, State Government, Fed. Government |
| Amount: | Peak Demand Reduction: $175/kW
Annual Energy Savings: $0.06/kWh
Schools and Universities Peak Demand Reduction: $235/kW
Schools and Universities Annual Energy Reduction: $0.046/kWh
Commercial Cool Saver (Tune Up): $75 |
| Eligible System Size: | Eligible customer must have a maximum demand of more than 100 kW. |
| Web Site: |
https://www.psoklahoma.com/save/programs/
|
Summary:
AEP's Public Service Company Commercial & Industrial Standard Offer Program pays incentives to customers who install energy efficiency measures in commercial or industrial facilities that are located within AEP's Oklahoma service territory. These facilities must have a maximum demand of more than 100 kW and must receive their electricity from Public Service Company of Oklahoma (PSO). Incentives are paid out for both energy and demand savings. Commercial, industrial, and small business customers are eligible for this incentive offering. Interested customers can start the participation process by submitting an Initial Application and a Final Application to AEP PSO to reserve funding based on the expected demand and annual energy savings for a proposed project.
The Model Cities and Smart Schools (for K12 schools and accredited higher education institutions) Programs provide incentives for the installation of approved energy efficiency measures in buildings owned by governments. Partners enrolling in these programs will receive energy efficiency consulting and technical assistance to help them make cost effective decisions regarding energy efficiency projects. This program will reduce peak electric demand and energy use. To ensure incentives are available for multiple projects, a program partner and its affiliates may be limited to a maximum of 20% of the PSO Model Cities program incentives budget in any funding year. Funds for each year are paid on a first come first served basis. Partners are encouraged to complete their projects as early as possible to ensure they receive the full project incentive. |
|
 |
Disclaimer: The information presented on the DSIRE web site provides an unofficial overview of financial incentives and other policies. It does not constitute professional tax advice or other professional financial guidance, and it should not be used as the only source of information when making purchasing decisions, investment decisions or tax decisions, or when executing other binding agreements. Please refer to the individual contact provided below each summary to verify that a specific financial incentive or other policy applies to your project.
While the DSIRE staff strives to provide the best information possible, the DSIRE staff, the N.C. Solar Center, N.C. State University and the Interstate Renewable Energy Council, Inc. make no representations or warranties, either express or implied, concerning the accuracy, completeness, reliability or suitability of the information. The DSIRE staff, the N.C. Solar Center, N.C. State University and the Interstate Renewable Energy Council, Inc. disclaim all liability of any kind arising out of your use or misuse of the information contained or referenced on DSIRE Web pages.
|
