Syndromic Surveillance Tool @ NIST

Welcome to the NIST Syndromic Surveillance Validation Suite

The NIST Syndromic Surveillance Validation Suite is intended for certifying 2014 Edition Meaningful Use EHR technology. The validation suite provides functionality to test EHR senders. The Syndromic Surveillance test tool covers the §170.314(f)(3) Transmission to public health agencies - Syndromic Surveillance Test Procedure. Use the Context-based Validation Tab for Meaningful Use certification testing.

A Google Group (HL7v2 Syndromic Testing) has been established for discussion/questions of the Implementation Guide, testing tool and testing issues. No membership is required. A google account is required for posting.

Site: https://groups.google.com/d/forum/hl7v2-syndromic-testing
Email: hl7v2-syndromic-testing@googlegroups.com

The following browsers are supported: Internet Explorer versions 8 and 9, Firefox, and Chrome. Recommended browsers are Internet Explorer 9, Firefox and Chrome.

Upload Message

Test Cases

Upload Message

Group

Segment

Field

Component

Subcomponent

R,RE,C (only)

R,RE,C,O,X (All)

Location	Usage	Cardinality	Data Type	Length	Table	Predicate	Conformance Statement
MSH : Message Header	R	[1,1]					SS-7:An instance of MSH.21 (Message Profile Identifier) SHALL contain the constant value 'PH_SS-Ack^SS Sender^2.16.840.1.114222.4.10.3^ISO' OR 'PH_SS-NoAck^SS Sender^2.16.840.1.114222.4.10.3^ISO'
MSH.1 : Field Separator	R	[1,1]	ST	[1,1]			SS-1:MSH.1 (Field Separator) SHALL contain the constant value '\|'.
MSH.2 : Encoding Characters	R	[1,1]	ST	[1,4]			SS-2:MSH.2 (Encoding Characters) SHALL contain the constant value '^~\&'.
MSH.4 : Sending Facility	R	[1,1]	HD_SS	[1,227]
MSH.7 : Date/Time Of Message	R	[1,1]	TS_SS	[1,26]
MSH.9 : Message Type	R	[1,1]	MSG_SS	[1,15]			SS-4.1:MSH-9 (Message Type) SHALL be 'ADT^A01^ADT_A01'.
MSH.10 : Message Control ID	R	[1,1]	ST	[1,199]
MSH.11 : Processing ID	R	[1,1]	PT_SS	[1,3]
MSH.12 : Version ID	R	[1,1]	VID_SS	[1,5]
MSH.21 : Message Profile Identifier	R	[0,*]	EI_SS	[1,427]
EVN : Event Type	R	[1,1]
EVN.2 : Recorded Date/Time	R	[1,1]	TS_SS	[1,26]
EVN.7 : Event Facility	R	[1,1]	HD_SS_2	[1,241]
PID : Patient Identification	R	[1,1]
PID.1 : Set ID - PID	R	[1,1]	SI	[1,4]			SS-9:PID-1 (Set ID) SHALL have the Literal Value of '1'
PID.3 : Patient Identifier List	R	[1,*]	CX_SS	[1,478]
PID.5 : Patient Name	R	[1,*]	XPN_SS	[1,294]
PID.8 : Administrative Sex	RE	[0,1]	IS	[1,1]	PHVS_AdministrativeSex_HL7_2x
PID.10 : Race	RE	[0,*]	CE_SS_1	[1,478]	Race Category (CDC)
PID.11 : Patient Address	RE	[0,1]	XAD_SS	[1,513]
PID.22 : Ethnic Group	RE	[0,1]	CE_SS_1	[1,478]	Ethnicity Group (CDC)
PID.29 : Patient Death Date and Time	C(RE/X)	[0,1]	TS_SS	[1,26]		If PV1.36 is valued '20'.
PID.30 : Patient Death Indicator	C(RE/X)	[0,1]	ID	[1,1]		If PV1.36 is valued '20'.	SS-11:If valued, PID-30 (Patient Death Indicator), SHALL be valued to the Literal Value 'Y'.
PV1 : Patient Visit	R	[1,1]
PV1.1 : Set ID - PV1	RE	[0,1]	SI	[1,4]			SS-12:PV1-1 (Set ID) SHALL have the Literal Value of '1'.
PV1.19 : Visit Number	R	[1,1]	CX_SS	[1,478]
PV1.36 : Discharge Disposition	RE	[0,1]	IS	[1,3]	0112
PV1.44 : Admit Date/Time	R	[1,1]	TS_SS	[1,26]
PV2 : Patient Visit Additional Information	RE	[0,1]
PV2.3 : Admit Reason	RE	[0,1]	CE_SS_2	[1,478]	ICD-9_ICD-10_SNOMED
OBX : Observation / Result	R	[1,*]
OBX.1 : Set ID - OBX	R	[1,1]	SI	[1,4]			SS-31:The value of OBX-1 (Set ID - OBX) SHALL be valued sequentially starting the value '1'.
OBX.2 : Value Type	R	[1,1]	ID	[1,3]	0125		SS-16:OBX-2 SHALL be valued to the Literal Value in the set ('TX', 'NM', 'CWE') and MAY support the data types 'TS' and 'XAD'.
OBX.3 : Observation Identifier	R	[1,1]	CE_SS_3	[1,478]	Observation Identifier (Syndromic Surveillance)
OBX.5 : Observation Value	RE	[0,*]	varies	[1,99999]
OBX.6 : Units	C(R/X)	[0,1]	CE_SS_3	[1,62]	UCUM	If OBX.2 (Value Type) is valued "NM".
OBX.11 : Observation Result Status	R	[1,1]	ID	[1,1]	0085
DG1 : Diagnosis	RE	[0,*]
DG1.1 : Set ID - DG1	R	[1,1]	SI	[1,4]			SS-20:DG1-1 (Set ID) for the first occurrence of a DG1 Segment SHALL have the Literal Value of '1'. Each following occurrence SHALL be numbered consecutively.
DG1.3 : Diagnosis Code - DG1	R	[0,1]	CE_SS_4	[1,478]	ICD-9_ICD-10_SNOMED
DG1.6 : Diagnosis Type	R	[1,1]	IS	[1,2]	0052

Location	Usage	Cardinality	Data Type	Length	Conformance Statement
MSH.1 : Field Separator	R	[1,1]	ST	[1,1]	SS-1:MSH.1 (Field Separator) SHALL contain the constant value '\|'.
MSH.2 : Encoding Characters	R	[1,1]	ST	[1,4]	SS-2:MSH.2 (Encoding Characters) SHALL contain the constant value '^~\&'.
MSH.4 : Sending Facility	R	[1,1]	HD_SS	[1,227]
MSH.7 : Date/Time Of Message	R	[1,1]	TS_SS	[1,26]
MSH.9 : Message Type	R	[1,1]	MSG_SS	[1,15]	SS-4.1:MSH-9 (Message Type) SHALL be 'ADT^A01^ADT_A01'.
MSH.10 : Message Control ID	R	[1,1]	ST	[1,199]
MSH.11 : Processing ID	R	[1,1]	PT_SS	[1,3]
MSH.12 : Version ID	R	[1,1]	VID_SS	[1,5]
MSH.21 : Message Profile Identifier	R	[0,*]	EI_SS	[1,427]

Location	Usage	Cardinality	Data Type	Length	Table	Predicate	Conformance Statement
EVN.2 : Recorded Date/Time	R	[1,1]	TS_SS	[1,26]
EVN.7 : Event Facility	R	[1,1]	HD_SS_2	[1,241]

Location	Usage	Cardinality	Data Type	Length	Table	Predicate	Conformance Statement
PID.1 : Set ID - PID	R	[1,1]	SI	[1,4]			SS-9:PID-1 (Set ID) SHALL have the Literal Value of '1'
PID.3 : Patient Identifier List	R	[1,*]	CX_SS	[1,478]
PID.5 : Patient Name	R	[1,*]	XPN_SS	[1,294]
PID.8 : Administrative Sex	RE	[0,1]	IS	[1,1]	PHVS_AdministrativeSex_HL7_2x
PID.10 : Race	RE	[0,*]	CE_SS_1	[1,478]	Race Category (CDC)
PID.11 : Patient Address	RE	[0,1]	XAD_SS	[1,513]
PID.22 : Ethnic Group	RE	[0,1]	CE_SS_1	[1,478]	Ethnicity Group (CDC)
PID.29 : Patient Death Date and Time	C(RE/X)	[0,1]	TS_SS	[1,26]		If PV1.36 is valued '20'.
PID.30 : Patient Death Indicator	C(RE/X)	[0,1]	ID	[1,1]		If PV1.36 is valued '20'.	SS-11:If valued, PID-30 (Patient Death Indicator), SHALL be valued to the Literal Value 'Y'.

Location	Usage	Cardinality	Data Type	Length	Table	Conformance Statement
PV1.1 : Set ID - PV1	RE	[0,1]	SI	[1,4]		SS-12:PV1-1 (Set ID) SHALL have the Literal Value of '1'.
PV1.19 : Visit Number	R	[1,1]	CX_SS	[1,478]
PV1.36 : Discharge Disposition	RE	[0,1]	IS	[1,3]	0112
PV1.44 : Admit Date/Time	R	[1,1]	TS_SS	[1,26]

Location	Usage	Cardinality	Data Type	Length	Table	Predicate	Conformance Statement
PV2.3 : Admit Reason	RE	[0,1]	CE_SS_2	[1,478]	ICD-9_ICD-10_SNOMED

Location	Usage	Cardinality	Data Type	Length	Table	Predicate	Conformance Statement
OBX.1 : Set ID - OBX	R	[1,1]	SI	[1,4]			SS-31:The value of OBX-1 (Set ID - OBX) SHALL be valued sequentially starting the value '1'.
OBX.2 : Value Type	R	[1,1]	ID	[1,3]	0125		SS-16:OBX-2 SHALL be valued to the Literal Value in the set ('TX', 'NM', 'CWE') and MAY support the data types 'TS' and 'XAD'.
OBX.3 : Observation Identifier	R	[1,1]	CE_SS_3	[1,478]	Observation Identifier (Syndromic Surveillance)
OBX.5 : Observation Value	RE	[0,*]	varies	[1,99999]
OBX.6 : Units	C(R/X)	[0,1]	CE_SS_3	[1,62]	UCUM	If OBX.2 (Value Type) is valued "NM".
OBX.11 : Observation Result Status	R	[1,1]	ID	[1,1]	0085

Location	Usage	Cardinality	Data Type	Length	Table	Conformance Statement
DG1.1 : Set ID - DG1	R	[1,1]	SI	[1,4]		SS-20:DG1-1 (Set ID) for the first occurrence of a DG1 Segment SHALL have the Literal Value of '1'. Each following occurrence SHALL be numbered consecutively.
DG1.3 : Diagnosis Code - DG1	R	[0,1]	CE_SS_4	[1,478]	ICD-9_ICD-10_SNOMED
DG1.6 : Diagnosis Type	R	[1,1]	IS	[1,2]	0052

R,RE,C (only)

R,RE,C,O,X (All)

Location	Usage	Cardinality	Data Type	Length	Table	Predicate	Conformance Statement
MSH : Message Header	R	[1,1]					SS-7:An instance of MSH.21 (Message Profile Identifier) SHALL contain the constant value 'PH_SS-Ack^SS Sender^2.16.840.1.114222.4.10.3^ISO' OR 'PH_SS-NoAck^SS Sender^2.16.840.1.114222.4.10.3^ISO'
MSH.1 : Field Separator	R	[1,1]	ST	[1,1]			SS-1:MSH.1 (Field Separator) SHALL contain the constant value '\|'.
MSH.2 : Encoding Characters	R	[1,1]	ST	[1,4]			SS-2:MSH.2 (Encoding Characters) SHALL contain the constant value '^~\&'.
MSH.4 : Sending Facility	R	[1,1]	HD_SS	[1,227]
MSH.7 : Date/Time Of Message	R	[1,1]	TS_SS	[1,26]
MSH.9 : Message Type	R	[1,1]	MSG_SS	[1,15]			SS-4.2:MSH-9 (Message Type) SHALL be 'ADT^A03^ADT_A03'.
MSH.10 : Message Control ID	R	[1,1]	ST	[1,199]
MSH.11 : Processing ID	R	[1,1]	PT_SS	[1,3]
MSH.12 : Version ID	R	[1,1]	VID_SS	[1,5]
MSH.21 : Message Profile Identifier	R	[0,*]	EI_SS	[1,427]
EVN : Event Type	R	[1,1]
EVN.2 : Recorded Date/Time	R	[1,1]	TS_SS	[1,26]
EVN.7 : Event Facility	R	[1,1]	HD_SS_2	[1,241]
PID : Patient Identification	R	[1,1]
PID.1 : Set ID - PID	R	[1,1]	SI	[1,4]			SS-9:PID-1 (Set ID) SHALL have the Literal Value of '1'
PID.3 : Patient Identifier List	R	[1,*]	CX_SS	[1,478]
PID.5 : Patient Name	R	[1,*]	XPN_SS	[1,294]
PID.8 : Administrative Sex	RE	[0,1]	IS	[1,1]	PHVS_AdministrativeSex_HL7_2x
PID.10 : Race	RE	[0,*]	CE_SS_1	[1,478]	Race Category (CDC)
PID.11 : Patient Address	RE	[0,1]	XAD_SS	[1,513]
PID.22 : Ethnic Group	RE	[0,1]	CE_SS_1	[1,478]	Ethnicity Group (CDC)
PID.29 : Patient Death Date and Time	C(RE/X)	[0,1]	TS_SS	[1,26]		If PV1.36 is valued '20'.
PID.30 : Patient Death Indicator	C(RE/X)	[0,1]	ID	[1,1]		If PV1.36 is valued '20'.	SS-11:If valued, PID-30 (Patient Death Indicator), SHALL be valued to the Literal Value 'Y'.
PV1 : Patient Visit	R	[1,1]
PV1.1 : Set ID - PV1	RE	[0,1]	SI	[1,4]			SS-12:PV1-1 (Set ID) SHALL have the Literal Value of '1'.
PV1.19 : Visit Number	R	[1,1]	CX_SS	[1,478]
PV1.36 : Discharge Disposition	RE	[0,1]	IS	[1,3]	0112
PV1.44 : Admit Date/Time	R	[1,1]	TS_SS	[1,26]
PV2 : Patient Visit Additional Information	RE	[0,1]
PV2.3 : Admit Reason	RE	[0,1]	CE_SS_2	[1,478]	ICD-9_ICD-10_SNOMED
DG1 : Diagnosis	RE	[0,*]
DG1.1 : Set ID - DG1	R	[1,1]	SI	[1,4]			SS-20:DG1-1 (Set ID) for the first occurrence of a DG1 Segment SHALL have the Literal Value of '1'. Each following occurrence SHALL be numbered consecutively.
DG1.3 : Diagnosis Code - DG1	R	[0,1]	CE_SS_4	[1,478]	ICD-9_ICD-10_SNOMED
DG1.6 : Diagnosis Type	R	[1,1]	IS	[1,2]	0052
OBX : Observation / Result	R	[1,*]
OBX.1 : Set ID - OBX	R	[1,1]	SI	[1,4]			SS-31:The value of OBX-1 (Set ID - OBX) SHALL be valued sequentially starting the value '1'.
OBX.2 : Value Type	R	[1,1]	ID	[1,3]	0125		SS-16:OBX-2 SHALL be valued to the Literal Value in the set ('TX', 'NM', 'CWE') and MAY support the data types 'TS' and 'XAD'.
OBX.3 : Observation Identifier	R	[1,1]	CE_SS_3	[1,478]	Observation Identifier (Syndromic Surveillance)
OBX.5 : Observation Value	RE	[0,*]	varies	[1,99999]
OBX.6 : Units	C(R/X)	[0,1]	CE_SS_3	[1,62]	UCUM	If OBX.2 (Value Type) is valued "NM".
OBX.11 : Observation Result Status	R	[1,1]	ID	[1,1]	0085

Location	Usage	Cardinality	Data Type	Length	Conformance Statement
MSH.1 : Field Separator	R	[1,1]	ST	[1,1]	SS-1:MSH.1 (Field Separator) SHALL contain the constant value '\|'.
MSH.2 : Encoding Characters	R	[1,1]	ST	[1,4]	SS-2:MSH.2 (Encoding Characters) SHALL contain the constant value '^~\&'.
MSH.4 : Sending Facility	R	[1,1]	HD_SS	[1,227]
MSH.7 : Date/Time Of Message	R	[1,1]	TS_SS	[1,26]
MSH.9 : Message Type	R	[1,1]	MSG_SS	[1,15]	SS-4.2:MSH-9 (Message Type) SHALL be 'ADT^A03^ADT_A03'.
MSH.10 : Message Control ID	R	[1,1]	ST	[1,199]
MSH.11 : Processing ID	R	[1,1]	PT_SS	[1,3]
MSH.12 : Version ID	R	[1,1]	VID_SS	[1,5]
MSH.21 : Message Profile Identifier	R	[0,*]	EI_SS	[1,427]

Location	Usage	Cardinality	Data Type	Length	Table	Predicate	Conformance Statement
EVN.2 : Recorded Date/Time	R	[1,1]	TS_SS	[1,26]
EVN.7 : Event Facility	R	[1,1]	HD_SS_2	[1,241]

Location	Usage	Cardinality	Data Type	Length	Table	Predicate	Conformance Statement
PID.1 : Set ID - PID	R	[1,1]	SI	[1,4]			SS-9:PID-1 (Set ID) SHALL have the Literal Value of '1'
PID.3 : Patient Identifier List	R	[1,*]	CX_SS	[1,478]
PID.5 : Patient Name	R	[1,*]	XPN_SS	[1,294]
PID.8 : Administrative Sex	RE	[0,1]	IS	[1,1]	PHVS_AdministrativeSex_HL7_2x
PID.10 : Race	RE	[0,*]	CE_SS_1	[1,478]	Race Category (CDC)
PID.11 : Patient Address	RE	[0,1]	XAD_SS	[1,513]
PID.22 : Ethnic Group	RE	[0,1]	CE_SS_1	[1,478]	Ethnicity Group (CDC)
PID.29 : Patient Death Date and Time	C(RE/X)	[0,1]	TS_SS	[1,26]		If PV1.36 is valued '20'.
PID.30 : Patient Death Indicator	C(RE/X)	[0,1]	ID	[1,1]		If PV1.36 is valued '20'.	SS-11:If valued, PID-30 (Patient Death Indicator), SHALL be valued to the Literal Value 'Y'.

Location	Usage	Cardinality	Data Type	Length	Table	Conformance Statement
PV1.1 : Set ID - PV1	RE	[0,1]	SI	[1,4]		SS-12:PV1-1 (Set ID) SHALL have the Literal Value of '1'.
PV1.19 : Visit Number	R	[1,1]	CX_SS	[1,478]
PV1.36 : Discharge Disposition	RE	[0,1]	IS	[1,3]	0112
PV1.44 : Admit Date/Time	R	[1,1]	TS_SS	[1,26]

Location	Usage	Cardinality	Data Type	Length	Table	Predicate	Conformance Statement
PV2.3 : Admit Reason	RE	[0,1]	CE_SS_2	[1,478]	ICD-9_ICD-10_SNOMED

Location	Usage	Cardinality	Data Type	Length	Table	Conformance Statement
DG1.1 : Set ID - DG1	R	[1,1]	SI	[1,4]		SS-20:DG1-1 (Set ID) for the first occurrence of a DG1 Segment SHALL have the Literal Value of '1'. Each following occurrence SHALL be numbered consecutively.
DG1.3 : Diagnosis Code - DG1	R	[0,1]	CE_SS_4	[1,478]	ICD-9_ICD-10_SNOMED
DG1.6 : Diagnosis Type	R	[1,1]	IS	[1,2]	0052

Location	Usage	Cardinality	Data Type	Length	Table	Predicate	Conformance Statement
OBX.1 : Set ID - OBX	R	[1,1]	SI	[1,4]			SS-31:The value of OBX-1 (Set ID - OBX) SHALL be valued sequentially starting the value '1'.
OBX.2 : Value Type	R	[1,1]	ID	[1,3]	0125		SS-16:OBX-2 SHALL be valued to the Literal Value in the set ('TX', 'NM', 'CWE') and MAY support the data types 'TS' and 'XAD'.
OBX.3 : Observation Identifier	R	[1,1]	CE_SS_3	[1,478]	Observation Identifier (Syndromic Surveillance)
OBX.5 : Observation Value	RE	[0,*]	varies	[1,99999]
OBX.6 : Units	C(R/X)	[0,1]	CE_SS_3	[1,62]	UCUM	If OBX.2 (Value Type) is valued "NM".
OBX.11 : Observation Result Status	R	[1,1]	ID	[1,1]	0085

R,RE,C (only)

R,RE,C,O,X (All)

Location	Usage	Cardinality	Data Type	Length	Table	Predicate	Conformance Statement
MSH : Message Header	R	[1,1]					SS-7:An instance of MSH.21 (Message Profile Identifier) SHALL contain the constant value 'PH_SS-Ack^SS Sender^2.16.840.1.114222.4.10.3^ISO' OR 'PH_SS-NoAck^SS Sender^2.16.840.1.114222.4.10.3^ISO'
MSH.1 : Field Separator	R	[1,1]	ST	[1,1]			SS-1:MSH.1 (Field Separator) SHALL contain the constant value '\|'.
MSH.2 : Encoding Characters	R	[1,1]	ST	[1,4]			SS-2:MSH.2 (Encoding Characters) SHALL contain the constant value '^~\&'.
MSH.4 : Sending Facility	R	[1,1]	HD_SS	[1,227]
MSH.7 : Date/Time Of Message	R	[1,1]	TS_SS	[1,26]
MSH.9 : Message Type	R	[1,1]	MSG_SS	[1,15]			SS-4.3:MSH-9 (Message Type) SHALL be 'ADT^A04^ADT_A01'.
MSH.10 : Message Control ID	R	[1,1]	ST	[1,199]
MSH.11 : Processing ID	R	[1,1]	PT_SS	[1,3]
MSH.12 : Version ID	R	[1,1]	VID_SS	[1,5]
MSH.21 : Message Profile Identifier	R	[0,*]	EI_SS	[1,427]
EVN : Event Type	R	[1,1]
EVN.2 : Recorded Date/Time	R	[1,1]	TS_SS	[1,26]
EVN.7 : Event Facility	R	[1,1]	HD_SS_2	[1,241]
PID : Patient Identification	R	[1,1]
PID.1 : Set ID - PID	R	[1,1]	SI	[1,4]			SS-9:PID-1 (Set ID) SHALL have the Literal Value of '1'
PID.3 : Patient Identifier List	R	[1,*]	CX_SS	[1,478]
PID.5 : Patient Name	R	[1,*]	XPN_SS	[1,294]
PID.8 : Administrative Sex	RE	[0,1]	IS	[1,1]	PHVS_AdministrativeSex_HL7_2x
PID.10 : Race	RE	[0,*]	CE_SS_1	[1,478]	Race Category (CDC)
PID.11 : Patient Address	RE	[0,1]	XAD_SS	[1,513]
PID.22 : Ethnic Group	RE	[0,1]	CE_SS_1	[1,478]	Ethnicity Group (CDC)
PID.29 : Patient Death Date and Time	C(RE/X)	[0,1]	TS_SS	[1,26]		If PV1.36 is valued '20'.
PID.30 : Patient Death Indicator	C(RE/X)	[0,1]	ID	[1,1]		If PV1.36 is valued '20'.	SS-11:If valued, PID-30 (Patient Death Indicator), SHALL be valued to the Literal Value 'Y'.
PV1 : Patient Visit	R	[1,1]
PV1.1 : Set ID - PV1	RE	[0,1]	SI	[1,4]			SS-12:PV1-1 (Set ID) SHALL have the Literal Value of '1'.
PV1.19 : Visit Number	R	[1,1]	CX_SS	[1,478]
PV1.36 : Discharge Disposition	RE	[0,1]	IS	[1,3]	0112
PV1.44 : Admit Date/Time	R	[1,1]	TS_SS	[1,26]
PV2 : Patient Visit Additional Information	RE	[0,1]
PV2.3 : Admit Reason	RE	[0,1]	CE_SS_2	[1,478]	ICD-9_ICD-10_SNOMED
OBX : Observation / Result	R	[1,*]
OBX.1 : Set ID - OBX	R	[1,1]	SI	[1,4]			SS-31:The value of OBX-1 (Set ID - OBX) SHALL be valued sequentially starting the value '1'.
OBX.2 : Value Type	R	[1,1]	ID	[1,3]	0125		SS-16:OBX-2 SHALL be valued to the Literal Value in the set ('TX', 'NM', 'CWE') and MAY support the data types 'TS' and 'XAD'.
OBX.3 : Observation Identifier	R	[1,1]	CE_SS_3	[1,478]	Observation Identifier (Syndromic Surveillance)
OBX.5 : Observation Value	RE	[0,*]	varies	[1,99999]
OBX.6 : Units	C(R/X)	[0,1]	CE_SS_3	[1,62]	UCUM	If OBX.2 (Value Type) is valued "NM".
OBX.11 : Observation Result Status	R	[1,1]	ID	[1,1]	0085
DG1 : Diagnosis	RE	[0,*]
DG1.1 : Set ID - DG1	R	[1,1]	SI	[1,4]			SS-20:DG1-1 (Set ID) for the first occurrence of a DG1 Segment SHALL have the Literal Value of '1'. Each following occurrence SHALL be numbered consecutively.
DG1.3 : Diagnosis Code - DG1	R	[0,1]	CE_SS_4	[1,478]	ICD-9_ICD-10_SNOMED
DG1.6 : Diagnosis Type	R	[1,1]	IS	[1,2]	0052

Location	Usage	Cardinality	Data Type	Length	Conformance Statement
MSH.1 : Field Separator	R	[1,1]	ST	[1,1]	SS-1:MSH.1 (Field Separator) SHALL contain the constant value '\|'.
MSH.2 : Encoding Characters	R	[1,1]	ST	[1,4]	SS-2:MSH.2 (Encoding Characters) SHALL contain the constant value '^~\&'.
MSH.4 : Sending Facility	R	[1,1]	HD_SS	[1,227]
MSH.7 : Date/Time Of Message	R	[1,1]	TS_SS	[1,26]
MSH.9 : Message Type	R	[1,1]	MSG_SS	[1,15]	SS-4.3:MSH-9 (Message Type) SHALL be 'ADT^A04^ADT_A01'.
MSH.10 : Message Control ID	R	[1,1]	ST	[1,199]
MSH.11 : Processing ID	R	[1,1]	PT_SS	[1,3]
MSH.12 : Version ID	R	[1,1]	VID_SS	[1,5]
MSH.21 : Message Profile Identifier	R	[0,*]	EI_SS	[1,427]

Location	Usage	Cardinality	Data Type	Length	Table	Predicate	Conformance Statement
EVN.2 : Recorded Date/Time	R	[1,1]	TS_SS	[1,26]
EVN.7 : Event Facility	R	[1,1]	HD_SS_2	[1,241]

Location	Usage	Cardinality	Data Type	Length	Table	Predicate	Conformance Statement
PID.1 : Set ID - PID	R	[1,1]	SI	[1,4]			SS-9:PID-1 (Set ID) SHALL have the Literal Value of '1'
PID.3 : Patient Identifier List	R	[1,*]	CX_SS	[1,478]
PID.5 : Patient Name	R	[1,*]	XPN_SS	[1,294]
PID.8 : Administrative Sex	RE	[0,1]	IS	[1,1]	PHVS_AdministrativeSex_HL7_2x
PID.10 : Race	RE	[0,*]	CE_SS_1	[1,478]	Race Category (CDC)
PID.11 : Patient Address	RE	[0,1]	XAD_SS	[1,513]
PID.22 : Ethnic Group	RE	[0,1]	CE_SS_1	[1,478]	Ethnicity Group (CDC)
PID.29 : Patient Death Date and Time	C(RE/X)	[0,1]	TS_SS	[1,26]		If PV1.36 is valued '20'.
PID.30 : Patient Death Indicator	C(RE/X)	[0,1]	ID	[1,1]		If PV1.36 is valued '20'.	SS-11:If valued, PID-30 (Patient Death Indicator), SHALL be valued to the Literal Value 'Y'.

Location	Usage	Cardinality	Data Type	Length	Table	Conformance Statement
PV1.1 : Set ID - PV1	RE	[0,1]	SI	[1,4]		SS-12:PV1-1 (Set ID) SHALL have the Literal Value of '1'.
PV1.19 : Visit Number	R	[1,1]	CX_SS	[1,478]
PV1.36 : Discharge Disposition	RE	[0,1]	IS	[1,3]	0112
PV1.44 : Admit Date/Time	R	[1,1]	TS_SS	[1,26]

Location	Usage	Cardinality	Data Type	Length	Table	Predicate	Conformance Statement
PV2.3 : Admit Reason	RE	[0,1]	CE_SS_2	[1,478]	ICD-9_ICD-10_SNOMED

Location	Usage	Cardinality	Data Type	Length	Table	Predicate	Conformance Statement
OBX.1 : Set ID - OBX	R	[1,1]	SI	[1,4]			SS-31:The value of OBX-1 (Set ID - OBX) SHALL be valued sequentially starting the value '1'.
OBX.2 : Value Type	R	[1,1]	ID	[1,3]	0125		SS-16:OBX-2 SHALL be valued to the Literal Value in the set ('TX', 'NM', 'CWE') and MAY support the data types 'TS' and 'XAD'.
OBX.3 : Observation Identifier	R	[1,1]	CE_SS_3	[1,478]	Observation Identifier (Syndromic Surveillance)
OBX.5 : Observation Value	RE	[0,*]	varies	[1,99999]
OBX.6 : Units	C(R/X)	[0,1]	CE_SS_3	[1,62]	UCUM	If OBX.2 (Value Type) is valued "NM".
OBX.11 : Observation Result Status	R	[1,1]	ID	[1,1]	0085

Location	Usage	Cardinality	Data Type	Length	Table	Conformance Statement
DG1.1 : Set ID - DG1	R	[1,1]	SI	[1,4]		SS-20:DG1-1 (Set ID) for the first occurrence of a DG1 Segment SHALL have the Literal Value of '1'. Each following occurrence SHALL be numbered consecutively.
DG1.3 : Diagnosis Code - DG1	R	[0,1]	CE_SS_4	[1,478]	ICD-9_ICD-10_SNOMED
DG1.6 : Diagnosis Type	R	[1,1]	IS	[1,2]	0052

R,RE,C (only)

R,RE,C,O,X (All)

Location	Usage	Cardinality	Data Type	Length	Table	Predicate	Conformance Statement
MSH : Message Header	R	[1,1]					SS-7:An instance of MSH.21 (Message Profile Identifier) SHALL contain the constant value 'PH_SS-Ack^SS Sender^2.16.840.1.114222.4.10.3^ISO' OR 'PH_SS-NoAck^SS Sender^2.16.840.1.114222.4.10.3^ISO'
MSH.1 : Field Separator	R	[1,1]	ST	[1,1]			SS-1:MSH.1 (Field Separator) SHALL contain the constant value '\|'.
MSH.2 : Encoding Characters	R	[1,1]	ST	[1,4]			SS-2:MSH.2 (Encoding Characters) SHALL contain the constant value '^~\&'.
MSH.4 : Sending Facility	R	[1,1]	HD_SS	[1,227]
MSH.7 : Date/Time Of Message	R	[1,1]	TS_SS	[1,26]
MSH.9 : Message Type	R	[1,1]	MSG_SS	[1,15]			SS-4.4:MSH-9 (Message Type) SHALL be 'ADT^A08^ADT_A01'.
MSH.10 : Message Control ID	R	[1,1]	ST	[1,199]
MSH.11 : Processing ID	R	[1,1]	PT_SS	[1,3]
MSH.12 : Version ID	R	[1,1]	VID_SS	[1,5]
MSH.21 : Message Profile Identifier	R	[0,*]	EI_SS	[1,427]
EVN : Event Type	R	[1,1]
EVN.2 : Recorded Date/Time	R	[1,1]	TS_SS	[1,26]
EVN.7 : Event Facility	R	[1,1]	HD_SS_2	[1,241]
PID : Patient Identification	R	[1,1]
PID.1 : Set ID - PID	R	[1,1]	SI	[1,4]			SS-9:PID-1 (Set ID) SHALL have the Literal Value of '1'
PID.3 : Patient Identifier List	R	[1,*]	CX_SS	[1,478]
PID.5 : Patient Name	R	[1,*]	XPN_SS	[1,294]
PID.8 : Administrative Sex	RE	[0,1]	IS	[1,1]	PHVS_AdministrativeSex_HL7_2x
PID.10 : Race	RE	[0,*]	CE_SS_1	[1,478]	Race Category (CDC)
PID.11 : Patient Address	RE	[0,1]	XAD_SS	[1,513]
PID.22 : Ethnic Group	RE	[0,1]	CE_SS_1	[1,478]	Ethnicity Group (CDC)
PID.29 : Patient Death Date and Time	C(RE/X)	[0,1]	TS_SS	[1,26]		If PV1.36 is valued '20'.
PID.30 : Patient Death Indicator	C(RE/X)	[0,1]	ID	[1,1]		If PV1.36 is valued '20'.	SS-11:If valued, PID-30 (Patient Death Indicator), SHALL be valued to the Literal Value 'Y'.
PV1 : Patient Visit	R	[1,1]
PV1.1 : Set ID - PV1	RE	[0,1]	SI	[1,4]			SS-12:PV1-1 (Set ID) SHALL have the Literal Value of '1'.
PV1.19 : Visit Number	R	[1,1]	CX_SS	[1,478]
PV1.36 : Discharge Disposition	RE	[0,1]	IS	[1,3]	0112
PV1.44 : Admit Date/Time	R	[1,1]	TS_SS	[1,26]
PV2 : Patient Visit Additional Information	RE	[0,1]
PV2.3 : Admit Reason	RE	[0,1]	CE_SS_2	[1,478]	ICD-9_ICD-10_SNOMED
OBX : Observation / Result	R	[1,*]
OBX.1 : Set ID - OBX	R	[1,1]	SI	[1,4]			SS-31:The value of OBX-1 (Set ID - OBX) SHALL be valued sequentially starting the value '1'.
OBX.2 : Value Type	R	[1,1]	ID	[1,3]	0125		SS-16:OBX-2 SHALL be valued to the Literal Value in the set ('TX', 'NM', 'CWE') and MAY support the data types 'TS' and 'XAD'.
OBX.3 : Observation Identifier	R	[1,1]	CE_SS_3	[1,478]	Observation Identifier (Syndromic Surveillance)
OBX.5 : Observation Value	RE	[0,*]	varies	[1,99999]
OBX.6 : Units	C(R/X)	[0,1]	CE_SS_3	[1,62]	UCUM	If OBX.2 (Value Type) is valued "NM".
OBX.11 : Observation Result Status	R	[1,1]	ID	[1,1]	0085
DG1 : Diagnosis	RE	[0,*]
DG1.1 : Set ID - DG1	R	[1,1]	SI	[1,4]			SS-20:DG1-1 (Set ID) for the first occurrence of a DG1 Segment SHALL have the Literal Value of '1'. Each following occurrence SHALL be numbered consecutively.
DG1.3 : Diagnosis Code - DG1	R	[0,1]	CE_SS_4	[1,478]	ICD-9_ICD-10_SNOMED
DG1.6 : Diagnosis Type	R	[1,1]	IS	[1,2]	0052

Location	Usage	Cardinality	Data Type	Length	Conformance Statement
MSH.1 : Field Separator	R	[1,1]	ST	[1,1]	SS-1:MSH.1 (Field Separator) SHALL contain the constant value '\|'.
MSH.2 : Encoding Characters	R	[1,1]	ST	[1,4]	SS-2:MSH.2 (Encoding Characters) SHALL contain the constant value '^~\&'.
MSH.4 : Sending Facility	R	[1,1]	HD_SS	[1,227]
MSH.7 : Date/Time Of Message	R	[1,1]	TS_SS	[1,26]
MSH.9 : Message Type	R	[1,1]	MSG_SS	[1,15]	SS-4.4:MSH-9 (Message Type) SHALL be 'ADT^A08^ADT_A01'.
MSH.10 : Message Control ID	R	[1,1]	ST	[1,199]
MSH.11 : Processing ID	R	[1,1]	PT_SS	[1,3]
MSH.12 : Version ID	R	[1,1]	VID_SS	[1,5]
MSH.21 : Message Profile Identifier	R	[0,*]	EI_SS	[1,427]

Location	Usage	Cardinality	Data Type	Length	Table	Predicate	Conformance Statement
EVN.2 : Recorded Date/Time	R	[1,1]	TS_SS	[1,26]
EVN.7 : Event Facility	R	[1,1]	HD_SS_2	[1,241]

Location	Usage	Cardinality	Data Type	Length	Table	Predicate	Conformance Statement
PID.1 : Set ID - PID	R	[1,1]	SI	[1,4]			SS-9:PID-1 (Set ID) SHALL have the Literal Value of '1'
PID.3 : Patient Identifier List	R	[1,*]	CX_SS	[1,478]
PID.5 : Patient Name	R	[1,*]	XPN_SS	[1,294]
PID.8 : Administrative Sex	RE	[0,1]	IS	[1,1]	PHVS_AdministrativeSex_HL7_2x
PID.10 : Race	RE	[0,*]	CE_SS_1	[1,478]	Race Category (CDC)
PID.11 : Patient Address	RE	[0,1]	XAD_SS	[1,513]
PID.22 : Ethnic Group	RE	[0,1]	CE_SS_1	[1,478]	Ethnicity Group (CDC)
PID.29 : Patient Death Date and Time	C(RE/X)	[0,1]	TS_SS	[1,26]		If PV1.36 is valued '20'.
PID.30 : Patient Death Indicator	C(RE/X)	[0,1]	ID	[1,1]		If PV1.36 is valued '20'.	SS-11:If valued, PID-30 (Patient Death Indicator), SHALL be valued to the Literal Value 'Y'.

Location	Usage	Cardinality	Data Type	Length	Table	Conformance Statement
PV1.1 : Set ID - PV1	RE	[0,1]	SI	[1,4]		SS-12:PV1-1 (Set ID) SHALL have the Literal Value of '1'.
PV1.19 : Visit Number	R	[1,1]	CX_SS	[1,478]
PV1.36 : Discharge Disposition	RE	[0,1]	IS	[1,3]	0112
PV1.44 : Admit Date/Time	R	[1,1]	TS_SS	[1,26]

Location	Usage	Cardinality	Data Type	Length	Table	Predicate	Conformance Statement
PV2.3 : Admit Reason	RE	[0,1]	CE_SS_2	[1,478]	ICD-9_ICD-10_SNOMED

Location	Usage	Cardinality	Data Type	Length	Table	Predicate	Conformance Statement
OBX.1 : Set ID - OBX	R	[1,1]	SI	[1,4]			SS-31:The value of OBX-1 (Set ID - OBX) SHALL be valued sequentially starting the value '1'.
OBX.2 : Value Type	R	[1,1]	ID	[1,3]	0125		SS-16:OBX-2 SHALL be valued to the Literal Value in the set ('TX', 'NM', 'CWE') and MAY support the data types 'TS' and 'XAD'.
OBX.3 : Observation Identifier	R	[1,1]	CE_SS_3	[1,478]	Observation Identifier (Syndromic Surveillance)
OBX.5 : Observation Value	RE	[0,*]	varies	[1,99999]
OBX.6 : Units	C(R/X)	[0,1]	CE_SS_3	[1,62]	UCUM	If OBX.2 (Value Type) is valued "NM".
OBX.11 : Observation Result Status	R	[1,1]	ID	[1,1]	0085

Location	Usage	Cardinality	Data Type	Length	Table	Conformance Statement
DG1.1 : Set ID - DG1	R	[1,1]	SI	[1,4]		SS-20:DG1-1 (Set ID) for the first occurrence of a DG1 Segment SHALL have the Literal Value of '1'. Each following occurrence SHALL be numbered consecutively.
DG1.3 : Diagnosis Code - DG1	R	[0,1]	CE_SS_4	[1,478]	ICD-9_ICD-10_SNOMED
DG1.6 : Diagnosis Type	R	[1,1]	IS	[1,2]	0052

Group

Segment

Field

Component

Subcomponent

Data Type	Name	Usage	Cardinality	Length
1. CE_SS_1	CE_SS_1	-	[0,1]	[0,1]
2. CE_SS_2	CE_SS_2	-	[0,1]	[0,1]
3. CE_SS_3	CE_SS_3	-	[0,1]	[0,1]
4. CE_SS_4	CE_SS_4	-	[0,1]	[0,1]
5. CX_SS	CX_SS	-	[0,1]	[0,1]
6. EI_SS	EI_SS	-	[0,1]	[0,1]
7. HD_SS	HD_SS	-	[0,1]	[0,1]
8. HD_SS_2	HD_SS_2	-	[0,1]	[0,1]
9. MSG_SS	MSG_SS	-	[0,1]	[0,1]
10. PT_SS	PT_SS	-	[0,1]	[0,1]
11. TS_SS	TS_SS	-	[0,1]	[0,1]
12. VID_SS	VID_SS	-	[0,1]	[0,1]
13. XAD_SS	XAD_SS	-	[0,1]	[0,1]
14. XPN_SS	XPN_SS	-	[0,1]	[0,1]
15. CE	CE	-	[0,1]	[0,1]
16. CNE	CNE	-	[0,1]	[0,1]
17. CNN	CNN	-	[0,1]	[0,1]
18. CP	CP	-	[0,1]	[0,1]
19. CQ	CQ	-	[0,1]	[0,1]
20. CWE	CWE	-	[0,1]	[0,1]
21. CX	CX	-	[0,1]	[0,1]
22. DLD	DLD	-	[0,1]	[0,1]
23. DLN	DLN	-	[0,1]	[0,1]
24. DR	DR	-	[0,1]	[0,1]
25. ED	ED	-	[0,1]	[0,1]
26. EI	EI	-	[0,1]	[0,1]
27. EIP	EIP	-	[0,1]	[0,1]
28. ERL	ERL	-	[0,1]	[0,1]
29. FC	FC	-	[0,1]	[0,1]
30. FN	FN	-	[0,1]	[0,1]
31. HD	HD	-	[0,1]	[0,1]
32. JCC	JCC	-	[0,1]	[0,1]
33. MO	MO	-	[0,1]	[0,1]
34. MOC	MOC	-	[0,1]	[0,1]
35. MSG	MSG	-	[0,1]	[0,1]
36. NDL	NDL	-	[0,1]	[0,1]
37. OSD	OSD	-	[0,1]	[0,1]
38. PL	PL	-	[0,1]	[0,1]
39. PLN	PLN	-	[0,1]	[0,1]
40. PRL	PRL	-	[0,1]	[0,1]
41. PT	PT	-	[0,1]	[0,1]
42. RI	RI	-	[0,1]	[0,1]
43. RP	RP	-	[0,1]	[0,1]
44. RPT	RPT	-	[0,1]	[0,1]
45. SAD	SAD	-	[0,1]	[0,1]
46. SN	SN	-	[0,1]	[0,1]
47. SPS	SPS	-	[0,1]	[0,1]
48. TS	TS	-	[0,1]	[0,1]
49. TQ	TQ	-	[0,1]	[0,1]
50. VID	VID	-	[0,1]	[0,1]
51. XAD	XAD	-	[0,1]	[0,1]
52. XCN	XCN	-	[0,1]	[0,1]
53. XON	XON	-	[0,1]	[0,1]
54. XPN	XPN	-	[0,1]	[0,1]
55. XTN	XTN	-	[0,1]	[0,1]
56. DT	DT	-	[0,1]	[4,8]
57. DTM	DTM	-	[0,1]	[4,24]
58. FT	FT	-	[0,1]	[1,65536]
59. FT	GTS	-	[0,1]	[1,200]
60. ID	ID	-	[0,1]	[1,15]
61. IS	IS	-	[0,1]	[1,20]
62. NM	NM	-	[0,1]	[1,16]
63. SI	SI	-	[0,1]	[1,4]
64. ST	ST	-	[0,1]	[1,65536]
65. TM	TM	-	[0,1]	[2,16]
66. TX	TX	-	[0,1]	[1,65536]
67. varies	varies	-	[0,1]	[1,99999]

List of Tables

0052	Diagnosis Type (HL7)
0076	Message Type (Syndromic Surveillance)
0085	Observation Result Status (HL7)
0112	Discharge Disposition (HL7)
0125	Value Type (Syndromic Surveillance)
0190	Address Type (HL7)
0200	Name Type (Syndromic Surveillance)
0301	Universal ID Type (Syndromic Surveillance)
0354	Message Structure (Syndromic Surveillance)
0361	Application
0362	Facility
0363	Assigning authority
0396	Coding System HL7 2x Table 0396

Ethnicity Group (CDC)	Ethnicity group
Identifier Type (Syndromic Surveillance)	Identifier Type (Syndromic Surveillance)
Observation Identifier (Syndromic Surveillance)	Observation Identifier (Syndromic Surveillance)
PHVS_AdministrativeSex_HL7_2x	Gender (Syndromic Surveillance)
PHVS_AgeUnit_SyndromicSurveillance	Age Unit (Syndromic Surveillance)
PHVS_Disease_CDC	Disease
PHVS_FacilityVisitType_SyndromicSurveillance	Facility / Visit Type (Syndromic Surveillance)
PHVS_ProcessingID_HL7_2x	Processing ID (HL7)
PHVS_PulseOximetryUnit_UCUM	Pulse Oximetry Unit
PHVS_TemperatureUnit_UCUM	Temperature Unit
PHVS_VersionID_HL7_2x	Version ID (HL7)
Patient Class (Syndromic Surveillance)	Patient Class (Syndromic Surveillance)
Race Category (CDC)	Race Category

ICD - Codes used in SS Test Cases only

PHVS_AdministrativeDiagnosis_CDC_ICD-9CM	Diagnosis (ICD-9 CM)
PHVS_CauseOfDeath_ICD-10_CDC	Cause of Death (ICD-10)

FIPS5_2	State
FIPS6_4	County
ISO 3166-1	Country
Name of originating facility	Name of originating facility
National Provider Identifier	National Provider Identifier
USPS	Postal Code Value Set

Value Set Information

Copyright

HL7

The HL7 Version 2.5 and 2.5.1 Messaging Standard is an application protocol for electronic data exchange in healthcare. It and prior versions have widespread use in the U.S. and internationally. Both message formats and value sets / code tables (e.g., diagnosis type, gender, patient class, result status, specimen collection method, abnormal flags, observation result status codes interpretation, timestamp format) are contained in the standard. Visit www.hl7.org for more information

LOINC

This material contains content from LOINC® (http://loinc.org). The LOINC table, LOINC codes, and LOINC panels and forms file are copyright © 1995-2012, Regenstrief Institute, Inc. and the Logical Observation Identifiers Names and Codes (LOINC) Committee and available at no cost under the license at http://loinc.org/terms-of-use.

ISO

All ISO publications are protected by copyright. Therefore and unless otherwise specified, no part of an ISO publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying, microfilm, scanning, without permission in writing from the publisher.

Requests should be addressed to the ISO Central Secretariat :
ISO copyright office
Case postale 56
CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org

UCUM

This product includes all or a portion of the UCUM table, UCUM codes, and UCUM definitions or is derived from it, subject to a license from Regenstrief Institute, Inc. and The UCUM Organization. Your use of the UCUM table, UCUM codes, UCUM definitions also is subject to this license, a copy of which is available at http://unitsofmeasure.org. The current complete UCUM table, UCUM Specification are available for download at http://unitsofmeasure.org. The UCUM table and UCUM codes are copyright © 1995-2009, Regenstrief Institute, Inc. and the Unified Codes for Units of Measures (UCUM) Organization. All rights reserved. THE UCUM TABLE (IN ALL FORMATS), UCUM DEFINITIONS, AND SPECIFICATION ARE PROVIDED "AS IS." ANY EXPRESS OR IMPLIED WARRANTIES ARE DISCLAIMED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

SNOMED

This material includes SNOMED Clinical Terms® (SNOMED CT®) which is used by permission of the International Health Terminology Standards Development Organisation (IHTSDO). All rights reserved. SNOMED CT®, was originally created by The College of American Pathologists. "SNOMED" and "SNOMED CT" are registered trademarks of the IHTSDO.

User Documentation

Description	File Name/Link
Syndromic Surveillance Transmit Test Procedure	170.314f3transmissiontopubhealthsyndsurv_2014_tp_approved_v1.3.pdf
PHIN Messaging Guide for Syndromic Surveillance	PHIN_MSG_Guide_for_SS_ED_and_UC_Data_v1_1.pdf
Addendum to PHIN Messaging Guide for Syndromic Surveillance	SS Addendum_v1_1.pdf
Meaningful Use Testing Clarification Document	SS_MU-TestingClarification_R1_3_06262013.pdf
Syndromic Surveillance Tool Quick Reference Guide	NIST SS Quick Guide.ppt
Syndromic Surveillance Tool Tutorial	NIST SS_Tool_Tutorial.ppt
Understanding Syndromic Meaningful Use Certification Testing	UnderstandingSyndromic Surveillance_MUTesting 2014 Edition.pptx
ISDS Presentation for Understanding the Syndromic Surveillance Test Scenarios	ISDS UnderstandingSyndromicSurveillanceTestScenarios-Ishikawa.pptx
Syndromic Test Case Management Spreadsheet	SS_Data_V1.0_MAY20-2013_RDS.XLSX

Test Case Documentation

Test Case Name	Message Content	Test Data Specification	Test Story	Test Package	Example Message	Validation Context	Step Package Summary
SS_1_UC_Visit	-	-	-	-	-	-	-
SS_2_Patient_Dies	-	-	-	-	-	-	-
SS_3_ED_Visit_Admit	-	-	-	-	-	-	-

Resource Documentation

Profile Description	File Name
Syndromic Conformance Profile A01	Syndromic_ADT_A01.xml
Syndromic Conformance Profile A03	Syndromic_ADT_A03.xml
Syndromic Conformance Profile A04	Syndromic_ADT_A04.xml
Syndromic Conformance Profile A08	Syndromic_ADT_A08.xml
Dynamic DataTypes	SYNDROMIC_DynamicDatatypeMapping.xml
DataType Definition	datatype-definition.xml

Vocabulary Description	File Name
CDC Codes	CDC_VocabularyAnalysis.xml
External Codes	EXTERNAL_VocabularyAnalysis.xml
HL7 Codes	HL7_VocabularyAnalysis.xml
ICD Codes	ICD_VocabularyAnalysis.xml

Validation Tool Download

Installation Instuctions Files
Installation Guide - NIST HL7v2 Validation Tools v1.docx

War Files
mu-syndromic-1.7.2.zip
mu-syndromic-1.7.1.zip
mu-syndromic-1.7.0.zip
mu-syndromic-1.6.0.zip
mu-syndromic-1.5.0.zip
mu-syndromic-1.4.0.zip
mu-syndromic-1.3.0.zip
mu-syndromic-1.2.0.zip
mu-syndromic-1.1.0.zip
mu-syndromic-1.0.0.zip

Release Notes

Release	Date	Notes
1.7.0		SS_Release_Notes.1.7.0.docx
1.6.0		SS_Release_Notes.1.6.0.docx
1.5.0		SS_Release_Notes.1.5.0.docx
1.4.0		SS_Release_Notes.1.4.0.docx
1.3.0		SS_Release_Notes.1.3.0.docx
1.2.0		SS_Release_Notes.1.2.0.docx
1.1.0		SS_Release_Notes.1.1.0.docx
1.0.0		Initial Release

Known Issues

NIST HL7v2 Syndromic Validation Suite

Version: 1.7.2
Date: 03/02/2015

1) Disclaimer

Favorable outcome in the use of the test materials on this site does not imply conformance recognition by National Institute of Standards and Technology (NIST). Links to non-Federal Government Web sites do not imply NIST endorsement of any particular product, service, organization, company, information provider, or content. This software was developed at the NIST by employees of the Federal Government in the course of their official duties. Pursuant to title 17 Section 105 of the United States Code this software is not subject to copyright protection and is in the public domain. NIST assumes no responsibility whatsoever for its use by other parties, and makes no guarantees, expressed or implied, about its quality, reliability, or any other characteristic. We would appreciate acknowledgment if the software is used. This software can be redistributed and/or modified freely provided that any derivative works bear some notice that they are derived from it, and any modified versions bear some notice that they have been modified.

2) Patient Confidentiality Notice

In compliance with HIPAA Requirements, parties using the NIST HL7 V2 Validation Tools via this NIST Web site shall not use real data about living, identifiable individuals. Parties shall adhere to all Federal Regulations including, but not limited to the Health Insurance Portability and Accountability Act of 1996 (HIPAA).

Due to patient confidentiality issues (e.g., HIPPA requirements regarding PHI), this software should not be used via the NIST Web site for validation of messages containing real patient information. With proper precautions in place to maintain patient confidentiality, if an organization downloads the Validation Tool and uses it locally the Tool can validate messages with real patient information.

Display the following contents in the Validation Report

User Documentation

Test Case Documentation

Resource Documentation

Validation Tool Download

Release Notes

Known Issues

Deployment Information

Browsers Supported

External Links