Fault-Induced Delayed Voltage Recovery (FIDVR)

Fault-induced delayed voltage recovery (FIDVR) refers to unexpected delay in the recovery of voltage to its nominal value following the normal clearing of a fault. Initial observations of these delays by utilities in the western interconnection led to concerns that they might precipitate widespread cascading blackouts.

The FIDVR initiative sought to identify the physical mechanisms that caused the delay, assess the risks the delay and recovery posed to the reliability of the US power system, and, if appropriate, identify appropriate measures to manage these risks.

The initiative confirmed that stalled residential air conditioning (AC) units (powered by single-phase induction motors) were the cause of FIDVR. The initiative also confirmed that FIDVR events were common to utility distribution systems, but generally speaking did not pose a significant threat to the reliability of the bulk transmission system. The initiative is recognized as having contributed materially to renewed efforts by the power industry to better understand trends affecting the characteristics of loads, especially those involving power electronics, and their interactions with the power system.

Related Publications

Tenza, Nicholas W., and Scott Ghiocel. An Analysis of the Sensitivity of WECC Grid Planning Models to Assumptions Regarding the Composition of Loads In MEPPI Composite Load Model Study. Vol. Final Report. Produced by Mitsubishi Electric Power Products (MEPPI) for the Consortium for Electric Reliability Technology Solutions (CERTS), 2016.PDF icon PDF (11.94 MB)
Robles, Steven. 2014 FIDVR Events Analysis on Valley Distribution Circuits. Prepared for Lawrence Berkeley National Laboratory by Southern California Edison, 2015.PDF icon PDF (4.38 MB)
Robles, Steven. Commercial 3-Phase Rooftop Air Conditioner Test Report. Prepared for Lawrence Berkeley National Laboratory by Southern California Edison, 2015.PDF icon PDF (7.29 MB)
James, Dan, and John D. Kueck. Commercial Building Motor Protection Response Report. Pacific Northwest National Laboratory, 2015.
Current State of Load Modeling: Composite Load Model Development and Implementation In 2015 Workshop on Fault-Induced Delayed Voltage Recovery (FIDVR) & Dynamic Load Modeling., 2015.PDF icon Current State of Load Modeling (Kosterev) PDF (2.49 MB)
Kosterev, Dmitry. Development and Implementation of Composite Load Model in WECC. CIGRE 2015 Grid of the Future Conference, 2015.PDF icon PDF (2.59 MB)
Bravo, Richard J.. "Distribution FIDVR Events Analysis." In 2015 Seventh Annual IEEE Green Technologies Conference (GreenTech)2015 Seventh Annual IEEE Green Technologies Conference, 1-8. New Orleans, LA, USA: IEEE, 2015.
Field Measurements In 2015 Workshop on Fault-Induced Delayed Voltage Recovery (FIDVR) & Dynamic Load Modeling., 2015.PDF icon Distribution Data for FIDVR & Load Modeling (Thomas) PDF (640.11 KB)PDF icon SCE Distribution FIDVR Monitoring (Bravo) PDF (839.57 KB)PDF icon Voltage Dip Recordings (Undrill) PDF (839.57 KB)PDF icon Centerpoint Data Plots (Undrill) PDF (1.53 MB)
Fundamentals, Testing and Modeling of Air Conditioners In 2015 Workshop on Fault-Induced Delayed Voltage Recovery (FIDVR) & Dynamic Load Modeling., 2015.PDF icon Transient Behavior of Loads (Undrill) PDF (2.54 MB)PDF icon End-Use Testing at BPA (Kosterev) PDF (857.42 KB)PDF icon SCE AC Testing (Robles) PDF (1.06 MB)PDF icon Simulation Models for Single-Phase AC (Lesieutre) PDF (625.07 KB)
Load Model Data In 2015 Workshop on Fault-Induced Delayed Voltage Recovery (FIDVR) & Dynamic Load Modeling., 2015.PDF icon Composite Load Model Data (Quint) PDF (1.32 MB)PDF icon Motor Control and Protection (Kueck) PDF (311.07 KB)PDF icon Load Model Data Management (Davies) PDF (586.25 KB)PDF icon Load Loss (Kosterev) PDF (975.83 KB)
Manufacturing Perspective, Future Trends & Technologies In 2015 Workshop on Fault-Induced Delayed Voltage Recovery (FIDVR) & Dynamic Load Modeling., 2015.PDF icon Plug-in Electric Vehicle Charging (Halliwell) PDF (1.13 MB)PDF icon Smart Inverters and FIDVR (Berdner) PDF (1.11 MB)
Reliability Focus In 2015 Workshop on Fault-Induced Delayed Voltage Recovery (FIDVR) & Dynamic Load Modeling., 2015.PDF icon Load Modeling and FIDVR (Cummings) PDF (583.34 KB)
Robles, Steven. Residential Air Conditioner with VFD Test Report. Prepared for Lawrence Berkeley National Laboratory by Southern California Edison, 2015.PDF icon PDF (5.29 MB)
Bravo, Richard J., Chase Sun, and Thomas Bialek. "Voltage Ride-Through (VRT) Recommendations for Distributed Electronic-Coupled Generation." In 2015 Seventh Annual IEEE Green Technologies Conference (GreenTech)2015 Seventh Annual IEEE Green Technologies Conference, 9-12. New Orleans, LA, USA: IEEE, 2015.
Tenza, Nicholas W., and Scott Ghiocel. WECC Load Model Sensitivity Study: An Analysis of the Sensitivity of WECC Grid Planning Models to Assumptions Regarding the Composition of Loads. Produced by Mitsubishi Electric Power Products (MEPPI) for the Consortium for Electric Reliability Technology Solutions (CERTS), 2015.PDF icon PDF (1.06 MB)
Bravo, Richard J., Robert J. Yinger, and Patricia Arons. "Fault Induced Delayed Voltage Recovery (FIDVR) indicators." In 2014 IEEE/PES Transmission & Distribution Conference & Exposition (T&D)2014 IEEE PES T&D Conference and Exposition, 1-5. Chicago, IL, USA: IEEE, 2014.
Kueck, John D., Dmitry Kosterev, John Undrill, and Joseph H. Eto. "Voltage sag and recovery influence for modeling motor loads." In 2014 IEEE/PES Transmission & Distribution Conference & Exposition (T&D)2014 IEEE PES T&D Conference and Exposition, 1-5. Chicago, IL, USA: IEEE, 2014.

Pages

Related Publications

Tenza, Nicholas W., and Scott Ghiocel. An Analysis of the Sensitivity of WECC Grid Planning Models to Assumptions Regarding the Composition of Loads In MEPPI Composite Load Model Study. Vol. Final Report. Produced by Mitsubishi Electric Power Products (MEPPI) for the Consortium for Electric Reliability Technology Solutions (CERTS), 2016.PDF icon PDF (11.94 MB)
Robles, Steven. 2014 FIDVR Events Analysis on Valley Distribution Circuits. Prepared for Lawrence Berkeley National Laboratory by Southern California Edison, 2015.PDF icon PDF (4.38 MB)
Robles, Steven. Commercial 3-Phase Rooftop Air Conditioner Test Report. Prepared for Lawrence Berkeley National Laboratory by Southern California Edison, 2015.PDF icon PDF (7.29 MB)
James, Dan, and John D. Kueck. Commercial Building Motor Protection Response Report. Pacific Northwest National Laboratory, 2015.
Current State of Load Modeling: Composite Load Model Development and Implementation In 2015 Workshop on Fault-Induced Delayed Voltage Recovery (FIDVR) & Dynamic Load Modeling., 2015.PDF icon Current State of Load Modeling (Kosterev) PDF (2.49 MB)
Kosterev, Dmitry. Development and Implementation of Composite Load Model in WECC. CIGRE 2015 Grid of the Future Conference, 2015.PDF icon PDF (2.59 MB)
Bravo, Richard J.. "Distribution FIDVR Events Analysis." In 2015 Seventh Annual IEEE Green Technologies Conference (GreenTech)2015 Seventh Annual IEEE Green Technologies Conference, 1-8. New Orleans, LA, USA: IEEE, 2015.
Field Measurements In 2015 Workshop on Fault-Induced Delayed Voltage Recovery (FIDVR) & Dynamic Load Modeling., 2015.PDF icon Distribution Data for FIDVR & Load Modeling (Thomas) PDF (640.11 KB)PDF icon SCE Distribution FIDVR Monitoring (Bravo) PDF (839.57 KB)PDF icon Voltage Dip Recordings (Undrill) PDF (839.57 KB)PDF icon Centerpoint Data Plots (Undrill) PDF (1.53 MB)
Fundamentals, Testing and Modeling of Air Conditioners In 2015 Workshop on Fault-Induced Delayed Voltage Recovery (FIDVR) & Dynamic Load Modeling., 2015.PDF icon Transient Behavior of Loads (Undrill) PDF (2.54 MB)PDF icon End-Use Testing at BPA (Kosterev) PDF (857.42 KB)PDF icon SCE AC Testing (Robles) PDF (1.06 MB)PDF icon Simulation Models for Single-Phase AC (Lesieutre) PDF (625.07 KB)
Load Model Data In 2015 Workshop on Fault-Induced Delayed Voltage Recovery (FIDVR) & Dynamic Load Modeling., 2015.PDF icon Composite Load Model Data (Quint) PDF (1.32 MB)PDF icon Motor Control and Protection (Kueck) PDF (311.07 KB)PDF icon Load Model Data Management (Davies) PDF (586.25 KB)PDF icon Load Loss (Kosterev) PDF (975.83 KB)
Manufacturing Perspective, Future Trends & Technologies In 2015 Workshop on Fault-Induced Delayed Voltage Recovery (FIDVR) & Dynamic Load Modeling., 2015.PDF icon Plug-in Electric Vehicle Charging (Halliwell) PDF (1.13 MB)PDF icon Smart Inverters and FIDVR (Berdner) PDF (1.11 MB)
Reliability Focus In 2015 Workshop on Fault-Induced Delayed Voltage Recovery (FIDVR) & Dynamic Load Modeling., 2015.PDF icon Load Modeling and FIDVR (Cummings) PDF (583.34 KB)
Robles, Steven. Residential Air Conditioner with VFD Test Report. Prepared for Lawrence Berkeley National Laboratory by Southern California Edison, 2015.PDF icon PDF (5.29 MB)
Bravo, Richard J., Chase Sun, and Thomas Bialek. "Voltage Ride-Through (VRT) Recommendations for Distributed Electronic-Coupled Generation." In 2015 Seventh Annual IEEE Green Technologies Conference (GreenTech)2015 Seventh Annual IEEE Green Technologies Conference, 9-12. New Orleans, LA, USA: IEEE, 2015.
Tenza, Nicholas W., and Scott Ghiocel. WECC Load Model Sensitivity Study: An Analysis of the Sensitivity of WECC Grid Planning Models to Assumptions Regarding the Composition of Loads. Produced by Mitsubishi Electric Power Products (MEPPI) for the Consortium for Electric Reliability Technology Solutions (CERTS), 2015.PDF icon PDF (1.06 MB)
Bravo, Richard J., Robert J. Yinger, and Patricia Arons. "Fault Induced Delayed Voltage Recovery (FIDVR) indicators." In 2014 IEEE/PES Transmission & Distribution Conference & Exposition (T&D)2014 IEEE PES T&D Conference and Exposition, 1-5. Chicago, IL, USA: IEEE, 2014.
Kueck, John D., Dmitry Kosterev, John Undrill, and Joseph H. Eto. "Voltage sag and recovery influence for modeling motor loads." In 2014 IEEE/PES Transmission & Distribution Conference & Exposition (T&D)2014 IEEE PES T&D Conference and Exposition, 1-5. Chicago, IL, USA: IEEE, 2014.

Pages