Waste and Cleanup Risk Assessment
Dose Compliance Concentrations for Radionuclides in Buildings (BDCC)
You will need Adobe Reader to view some of the files on this page. See EPA's PDF page to learn more.
Contents
Note: CERCLA is NOT a Dose Based Program
BDCC Home
Welcome
Welcome to the EPA's Superfund Dose Compliance Concentrations for Radionuclides in Buildings (BDCC) Download and Calculator website for demonstrating compliance with dose-based Applicable or Relevant and Appropriate Requirements (ARARs). The recommended BDCCs on this website are dose levels for contaminated buildings, to help implement the NCP and EPA CERCLA guidance. EPA's CERCLA guidance on addressing building contamination can be found here.
This tool presents recommended BDCCs calculated using suggested default input parameters and the latest dose conversion factors. In addition, you may modify the input parameters to create site-specific BDCCs to meet the needs of your site, considering factors such as within the limitations of the underlying exposure scenarios, pathways and routes. To ensure accurate application of BDCCs, please see further guidance located in the "User's Guide", "What's New", 'FAQ", and "Download Area" links. Below is a general description of how BDCCs can be used for situations involving radionuclides. The EPA has prepared a fact sheet for the general public that describes BDCC uses, BDCC calculator operation and land uses available for assessment. Additionally, this fact sheet describes the BPRG and BDCC calculators in greater detail for EPA staff. The OSWER Directive, Superfund Radiation Risk Assessment: A Community Toolkit was also developed by the EPA to help the public understand more about the risk assessment process used at Superfund sites with radioactive contamination.
The BDCC calculator results were previously externally and internally verified, and the documentation of those reviews may be seen here. The BDCC calculator was previously peer reviewed, and the documentation of those peer reviews may be seen here. The BDCC calculator was largely developed based on the BPRG calculator, and benefited from its peer reviews which may be seen here.
Introduction
The primary purpose of this recommended BDCC calculation tool is to assist risk assessors, remedial project managers, and others involved with dose assessment and decision-making at sites with contaminated buildings.
This website has been updated after new EPA guidance has been issued. The website was initially made available for use in a transmittal memo entitled "Distribution of Superfund ARAR Dose Compliance Concentrations Goals for Radionuclides in Buildings (BDCC) and ARAR Dose Compliance Concentrations Goals for Radionuclides in Surfaces (SDCC) Electronic Calculator", January 4, 2010.
ARAR Dose Compliance Concentrations
Dose conversion factors (DCFs), or "dose coefficients", for a given radionuclide generally represent the dose equivalent per unit intake (i.e., ingestion or inhalation) or external exposure of that radionuclide. These DCFs normally are used to convert a radionuclide concentration in soil, air, water, or foodstuffs to a radiation dose. DCFs may be specified for specific body organs or tissues of interest, or as a weighted sum of individual organ dose, termed the effective dose equivalent. These DCFs may be multiplied by the total activity of each radionuclide inhaled or ingested per year, or the external exposure concentration to which a receptor may be exposed, to estimate the dose equivalent to the receptor.
Here you will find BDCCs calculated using the dose conversion factors from International Commission on Radiological Protection (ICRP) 30, ICRP 60, and ICRP 107. This website does not address the calculation of BDCCs for ARARs based on ICRP 2 dose conversion factors (e.g., 40 CFR 141.66(d), 10 CFR 61.41).
CERCLA is NOT a Dose-Based Program
It is EPA's recommendation that dose assessments should only be conducted under CERCLA where necessary to demonstrate ARAR compliance. Further, dose recommendations in guidance should generally not be used as to-be-considered material. For more information on issue, please see questions 33 and 36 on pages 27 to 29 of "Radiation Risk Assessment At CERCLA Sites: Q & A" (EPA 540-R-012-13, May 2014).
Also, EPA generally does not use ARARs greater than 12 mrem/yr to establish cleanup levels at CERCLA sites. Cleanup levels not based on an ARAR should be based on the carcinogenic risk range (generally 10-4 to 10-6, with 10-6 as the point of departure and 1 x 10-6 used for BPRGs. For further guidance on this issue, refer to question 35 on page 28 of "Radiation Risk Assessment At CERCLA Sites: Q & A" (EPA 540-R-012-13, May 2014).
Related CERCLA Calculators and Guidance.
It should also be noted that calculating a BDCC addresses neither human cancer risk or noncancer toxicity, nor potential ecological risk. Of the radionuclides generally found, at CERCLA sites, only uranium has potentially significant noncancer toxicity. When assessing sites with uranium as a contaminant, it may also be necessary to consider the noncancer toxicity of uranium, using other tools, such as EPA's Regional Screening Levels (RSLs) for Chemical Contaminants at Superfund Sites electronic calculator for uranium in soil, water, or air, and the WTC for uranium inside buildings. EPA's DCC Calculator should be used to assess radionuclide dose in soil, water, and air, and the SDCC Calculator for radionuclide dose for hard outside surfaces. EPA's PRG Calculator should be used to assess radionuclide cancer risk for soil, water, and air, BPRG Calculator for radionuclide cancer risk inside buildings, and the SPRG Calculator for radionuclide cancer for hard outside surfaces. Similarly, some sites with radiological contaminants in sensitive ecological settings may also need to be evaluated for potential ecological risk. EPA's guidance "Ecological Risk Assessment Guidance for Superfund: Process for Designing and Conducting Ecological Risk Assessment" contains an eight step process for using benchmarks for ecological effects in the remedy selection process.